PK Property Improvements

Guide · Landlords · 4 min read · Updated 17 November 2026

Rental Property Refurbishment Checklist for UK Landlords

Short answer

Between tenancies, a landlord should check safety first, then repair, then refresh. That means a valid gas safety record, an electrical inspection within the last five years, working smoke and carbon monoxide alarms and an energy rating that meets the minimum standard. Then fix damage and wear, repaint in durable finishes and replace tired flooring. A light refresh on a two-bedroom flat starts from around £2,500.

Rental Property Refurbishment Checklist for UK Landlords

Why speed matters between tenancies

Every week a rental property sits empty costs a week's rent, plus council tax and utilities in most cases. On a flat letting at £1,000 a month, a four-week void costs roughly £1,000 before any work is paid for. The goal is not the cheapest refurbishment but the one that gets the property let again quickly, to a good tenant, without needing the same work next time.

The best time to plan is before the tenant leaves. A walk-round during the notice period lets you list the work, order materials and book trades so they can start the day the keys come back.

Safety and compliance checks

Compliance comes first, because a property that fails it cannot be lawfully let and may expose you to enforcement or invalidate insurance. Requirements differ slightly between England, Scotland and Wales, so check the rules for where your property is. The points below reflect the main requirements in England.

  • Gas safety record: an annual check of gas appliances and flues by a Gas Safe registered engineer, with a copy given to the tenant.
  • Electrical inspection: an electrical installation condition report at least every five years under the 2020 private rented sector regulations.
  • Smoke alarms on every storey used as living accommodation, and carbon monoxide alarms in rooms with a fixed combustion appliance.
  • Energy performance certificate rated E or above under the minimum energy efficiency standards, unless an exemption is registered.
  • Legionella risk assessment for the water system, which is often a simple check on tanks, showers and outlets left unused.
  • Fire safety in HMOs and blocks, including fire doors and escape routes, where licensing or the building requires it.

Repairs to prioritise

After safety, focus on anything that will cause complaints or bigger costs later. Damp and mould are the top issue in rental homes. Check extractor fans in kitchens and bathrooms actually work and vent outside, clean and treat mould with a fungicidal wash, and look for the cause: leaking gutters, failed seals or blocked air bricks. Painting over mould without fixing the cause only brings it back.

Next, look at doors, locks and windows. Sticking doors, broken handles and failed window seals are cheap to fix now and generate repair calls if left. Reseal baths, showers and sinks with fresh silicone, regrout tired tiles and check for loose tiles or soft flooring around the toilet, which often signals a slow leak.

Finishes that last in a rental

Choosing the right materials saves money over several tenancies. Durable, neutral and easy-to-replace finishes reduce both wear and the time needed for the next refresh.

AreaBetter choice for rentalsWhy
WallsWipeable matt or eggshell in one neutral colourTouch-ups blend in and marks clean off
FlooringLuxury vinyl tile or laminate in living areasHard-wearing, quick to fit and easy to clean
KitchenReplace doors and worktops before whole unitsBig visual change for a fraction of a full refit
BathroomShower over bath with a fixed glass screenFewer leaks than curtains and suits most tenants
LightingLED fittings throughoutLower running costs and fewer bulb changes

Typical refurbishment costs

A light refresh on a two-bedroom flat, covering a full repaint, minor repairs and replacement flooring, starts from around £2,500. Adding a kitchen refresh with new doors and worktops, or a bathroom update with new sanitaryware and tiling, increases the total. A full bathroom renovation typically costs £6,000 to £12,000. Compliance work such as electrical remedials or new alarms is priced on top, and the electrical report itself is a separate inspection fee.

Ask for an itemised quote so you can decide what to do now and what can wait for the next void. Photographs of the finished work are also useful evidence at the end of the next tenancy when comparing condition against the inventory.

Managing a refurbishment from a distance

Many landlords own property some distance from where they live, which makes refurbishment harder to oversee. The answer is a clear written work list, agreed in advance, plus photographs at the start, at key stages and at the finish. Photos protect both sides: they show what was done and provide a dated record of condition before the next tenant moves in. Ask for keys to be collected from and returned to the letting agent, so you do not need to travel.

It also helps to keep a simple property file with the last gas safety record, electrical report, energy certificate, alarm test dates and a list of paint colours and flooring products used. When the next void comes round, matching paint and replacing a damaged section of flooring becomes quick and cheap, rather than a full redecoration. Over several tenancies, that record saves both time and money.

Reducing void time step by step

Book the check-out walk-round during the notice period. Agree a fixed list of work and order materials so they arrive before the keys come back. Book trades in the right order: repairs and electrical work first, then plastering, then decoration, then flooring, then cleaning. Run safety checks during the same window to avoid separate visits. Finally, have the property photographed for marketing as soon as it is finished, so the letting process starts while the paint is still fresh. With planning, many light refurbishments are completed within one to two weeks.

Questions people also ask

Can a landlord charge the tenant for refurbishment?

A landlord can only deduct from a tenant's protected tenancy money for damage beyond fair wear and tear, supported by the inventory and check-out report. General refurbishment, redecoration after normal use and upgrades are the landlord's cost. Disputes are handled by the tenancy protection scheme's dispute service, so good photographic records matter.

How often should a rental property be redecorated?

There is no fixed rule, but many landlords repaint every three to five years or at the end of a long tenancy. Using one neutral, wipeable paint throughout makes touch-ups between tenancies quick and avoids a full repaint every time. High-traffic areas such as hallways often need attention sooner than bedrooms.

Do I need an EICR before a new tenancy?

In England, the electrical installation must have been inspected within the last five years, and a copy of the report given to new tenants before they move in. If the last report is older, or recommended remedial work has not been done, you need to arrange that before letting. Scotland and Wales have their own electrical safety requirements.

Written and checked by the PK Property Improvements team. Read our editorial policy.

Get a free property improvements quote

Tell us what you need and we'll come back with a clear price.

Request a quote